基于包装功能的时间–温度指示器与食品新鲜度指示器研究进展

目的 从包装功能实现的角度分析研究时间–温度指示器和食品新鲜度指示器的原理、类型与发展趋势，指出开发设计时间–温度指示器和食品新鲜度指示器应完成的包装功能，为有效实现包装交流功能提供研究思路和技术支持。方法 列出现有食品包装功能在物理环境、周围环境和人类环境下的实现矩阵，通过研究时间–温度指示器和食品新鲜度指示器的实现原理和所满足的包装交流功能，探讨这2种技术提高矩阵中分值较低元素的可行性。结果 时间–温度指示器监测食品所经历的时间、温度的完整历程，有助于提高实现矩阵中ComA元素的分值;食品新鲜度指示器提供生理变化或微生物生长引起的食品质量变化的定性或半定量信息，有助于提高实现矩阵中ComH元素的分值。结论 时间–温度指示器和食品新鲜度指示器能够有效提升食品包装的交流功能，保证消费者安全，减少资源浪费，具有广阔的发展前景。     

Thermodynamic properties of sodium hexatitanate (Na2Ti6O13) at high temperature (298.15–1573 K)

Sodium hexatitanate (Na₂Ti₆O₁₃) was reported as an anode side material for Sodium ion batteries owing to low material cost, high energy efficiency, good thermal stability and long cycle life. Therefore, studies pertaining to the thermodynamic properties of Na₂Ti₆O₁₃ are indispensable for improving its service performance. However, a significant number of literature reviews concerning thermodynamic properties indicated that heat capacity of Na₂Ti₆O₁₃ at high temperatures should be confirmed. In this study, the 99.5% purity of Na₂Ti₆O₁₃ sample was successfully prepared via solid-state reaction using TiO₂ and Na₂CO₃ as initial materials. Heat capacity of the as-synthesized samples in the temperature range of 573–1523 K was measured using a multi-high temperature calorimeter 96 line. Heat capacity, Cp, from 298.15 to 1573 K was modeled as a polynomial formula with a prediction error of 3%: Cp = 474.08143 + 0.06286T-8.04068 × 10⁶ T⁻² (J⋅mol⁻¹⋅K⁻¹). In combination with the low-temperature data, heat capacity of Na₂Ti₆O₁₃ from 0 to 1573 K was given in present study. Values of changes in enthalpy, Gibbs free energy and entropy in the temperature range of 298.15–1573 K were calculated based on the temperature dependence of heat capacity.     

计及RSC控制的DFIG短路电流直流分量解析表达

现有文献针对计及转子变流器(RSC)控制的双馈感应风电机组(DFIG)定子短路电流解析表达,将定子磁链当作一阶直流衰减分量或忽略功率外环控制。基于DFIG电压、磁链和RSC控制方程,得到定子电流关于定子电压和定子功率的传递函数,提出定子电流的精确解析表达式。基于RSC内、外环PI参数关系,推导直流分量衰减时间常数和角频率关于PI参数的表达式。分析了RSC内外环PI参数对定子电流直流衰减分量的影响。仿真结果验证了解析表达式的准确性,为PI参数选取和保护装置测量、整定提供依据。     

Multiple Empirical Kernel Learning with Majority Projection for imbalanced problems

Traditional Multiple Empirical Kernel Learning (MEKL) expands the expressions of the sample and brings better classification ability by using different empirical kernels to map the original data space into multiple kernel spaces. To make MEKL suit for the imbalanced problems, this paper introduces a weight matrix and a regularization term into MEKL. The weight matrix assigns high misclassification cost to the minority samples to balanced misclassification cost between minority and majority class. The regularization term named Majority Projection (MP) is used to make the classification hyperplane fit the distribution shape of majority samples and enlarge the between-class distance of minority and majority class. The contributions of this work are: (i) assigning high cost to minority samples to deal with imbalanced problems, (ii) introducing a new regularization term to concern the property of data distribution, (iii) and modifying the original PAC-Bayes bound to test the error upper bound of MEKL-MP. Through analyzing the experimental results, the proposed MEKL-MP is well suited to the imbalanced problems and has lower generalization risk in accordance with the value of PAC-Bayes bound.     

On one boundary problem for nonlinear stationary controlled system

The object of study is nonlinear stationary controlled system of ordinary differential equations with constant disturbance in the right part. The problem of constructing the synthesising control function providing the transfer of this system from the initial state to the origin is considered. The sufficiently simple for numerical implementation algorithm of solution of the above-mentioned problem is obtained. It is shown that for local null controllability of the considered system, it is sufficient that the conditions of the Kalman's type were satisfied. In addition, the estimates restricting the choice of initial conditions and external disturbances under which the transfer is guaranteed are obtained. The main idea of the method of construction of the desired control function consists in reducing the original problem to stabilisation of a special kind linear non-stationary system and solving the Cauchy problem for an auxiliary system of ordinary differential equations closed by stabilising control. The simplicity of the realisation of this algorithm is determined by the construction of the auxiliary system and its stabilisation that could be obtained by analytical methods. The effectiveness of the method is illustrated by solving the problem of crane control and its numerical simulation.     

Heat capacities and standard entropies and enthalpies of some compounds essential for steelmaking and refractory design approximated by Debye-Einstein integrals

Heat capacity data for compounds located in the binary CaO–SiO₂, CaO–Al₂O₃ and MgO–Al₂O₃ systems are fitted by Debye-Einstein integrals. Starting from the fitted heat capacities, the standard values of the thermodynamic functions of these compounds are calculated. In almost all cases investigated, the derived standard entropies are within the uncertainties of the values provided in literature. The Debye-Einstein coefficients obtained in this thermodynamic assessment can be used to approximate the heat capacities, enthalpies and entropies of these compounds in the temperature range from 0 to 298.15 K.     

The influence of the processing route on the fragmentation of (Nb,Ti)C stringers and its role on mechanical properties and hydrogen embrittlement of nickel based alloy 718

The nickel-base superalloy 718 is a precipitation hardened alloy widely used in the nuclear fuel assembly of pressurized water reactors (PWR). However, the alloy can experience failure due to hydrogen embrittlement (HE). The processing route can influence the microstructure of the material and, therefore, the HE degree. In particular, the size and distribution of the (Nb,Ti)C particles can be affected by the processing. In this regard, the objective of this work was to analyze the influence of cold and hot deformation processing routes on the development of the microstructure, and the consequences on mechanical properties and hydrogen embrittlement. Tensile samples were hydrogenated through gaseous charging and compared to non-hydrogenated samples. Characterization was performed via scanning and transmission electron microscopies, as well as electron backscattered diffraction. The processing was effective to promote significant variations in average grain size and length fraction of special Σ3ⁿ boundaries, as well as reduction of average (Nb,Ti)C particle size, being these changes more intense for the cold-rolled route. For the mechanical properties, on one side, the cold-rolled route presented the highest increase in ductility for non-hydrogenated samples, while, on the other side, had the highest degree of embrittlement under hydrogen. This dual behavior was attributed to the interaction of hydrogen with the (Nb,Ti)C particles and stringers and its ensuing influence on the fracture processes.     

基于近似计算技术的FPRM电路面积优化

近似计算技术通过降低电路输出精度实现电路功耗、面积、速度等方面的优化.本文针对RM（Reed-Muller）逻辑中"异或"运算特点，提出了基于近似计算技术的适合FPRM逻辑的电路面积优化算法，包括基于不相交运算的RM逻辑错误率计算方法，及在错误率约束下，有利于面积优化的近似FPRM函数搜索方法等.优化算法用MCNC（Microelectronics Center of North Carolina）电路进行测试.实验结果表明，提出的算法可以处理输入变量个数为199个的大电路，在平均错误率为5.7%下，平均电路面积减少62.0%，并在实现面积优化的同时有利于实现电路的动态功耗的优化且对电路时延影响不大.